So, what are awning windows? Common crank out windows that are operated outwards from the bottom are called awning window units. Because they are simple to use, they work best in kitchens especially positioned above the counter. Because they open starting at the bottom, you can let fresh air into your kitchen all year round, no matter what kind of weather it is.
These window units are liked over sliding units since they are more energy-efficient, provide excellent ventilation while keeping rainwater out, are effortless to operate (just turn a handle, pull or push the bottom), and are commonly more durable. Awning window units are strong, but they are also susceptible to wear and eventually require replacement. The homeowner or a qualified expert can complete this. If you want to replace your awning window yourself, here are the common steps to follow.
Step 1: Take the Measurements of The Existing Window
To guarantee a proper fit, take exact measurements of the frame and current window before shopping for a replacement window awning. When purchasing new awning windows, make sure to operate the existing window to know how far it spreads and if there are any barriers to consider in order for windows to open completely.
Step2: Get Rid of the Old Windows
Clear the area surrounding the opening of the existing window units and any other debris such as wood fragments and nail heads. Look for rot instability or other damage on the wood framework that could affect the replacement awning window’s functionality.
Step 3: The Flashing
Install the flashing, ensuring the pieces overlap one another for optimal performance. The last flashing piece can be attached to the window’s frame and an appropriate seal can be achieved with silicone caulking.
Step 4: Fix the Replacement Unit
Using wood shims, make sure the new replacement awning window is perfectly plumb and level before sliding it into the opening. Once content reposition the window and fasten it firmly by securing the mounting window fin to the frame with nails. After that, you can customize your new unit by adding trim or finishing touches.
Putting In an Automated Awning Window
In case you installed a window operated manually, you can consider replacing the hand crank with an automated awning window operator by just following the instructions provided by the manufacturer.
As an alternative, follow the instructions below to install a replacement electric awning.
Step 1: Preparing the awning window opening
Measure the awnings width and also the wall against which it will be fixed first, being cautious not to step on any downspouts or outdoor lights.
Step 2: Hold The Header Board in Place
To make room for installing header boards, you will have to cut and get rid of any vinyl siding that you may have. By use of lag bolts and washers, attach the awning header board to the studs. So that it can sustain the awning’s weight, the header board needs to be securely fastened to the wall. Before fastening the board to the wall studs, make sure it is level.
Next, caulk all of the joints. Make holes in the studs then use an adjustable wrench to make the the bolts tight and to secure the header board.
Step 3: Set in the Awning Window Mounting Brackets
Now comes to installing the mounting brackets and making sure they are level with the wall where the window is to be mounted using the lag bolts and washers. The recommended mounting space is twelve inches.
Step 4: Installing the Replacement Awning
As you position the awning window on the mounting brackets, make sure the space between the base of the window opening where the awning is to be mounted and the bottom of the window is large enough. You can mount the window from the roof using a mount kit if there is insufficient room for the awning.
Step 5: Fit the Motorized Crank into Place
All that has to be done is slide the motorized crank mechanism on the old hand crank to replace the existing one. To lock and then tighten the electronic awning mechanism into place, remove the hand crank handle with an Allen wrench or screwdriver.
Check to see if it has been installed correctly and functions as intended by testing it.
For Purchasing edu guest posts contact eduguestpost.com